Printek FormsPro 4300 User Manual download pdf (Page 22)

Operation

Page 3-2

FormsPro 4503) is displayed. ONLINE, OFFLINE, and

other informational and error messages are displayed

when the conditions occur and/or you press the ONLINE

button without clearing an error condition. This display

also indicates various parameters and their values when

the printer is in the setup mode.

POWER This green LED indicates that the printer is plugged into

a power source, the power switch is on, and the internal

power supply is functional.

ONLINE This green LED indicates that the printer is ready to

receive printable characters and/or commands from the

host computer, and print or perform as requested.

FAULT This red LED indicates that the printer has detected an

error condition, such as paper out, paper jam, or an

internal diagnostic error. Many internal diagnostics are

performed each time the printer is turned on or reset, and

some continue to monitor operation during printing. For

a list of error messages and suggested remedies, refer to

the “In Case of Difficulty” section of this manual.

SETUP This yellow LED indicates that the setup mode has been

entered.

Bell The printer sounds a tone when it is directed to do so by

a bell character (BEL) from the host computer. Other

tones also alert operators of error conditions, such as

paper out, and indicate when buttons are pressed.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 104 105

No comments

Printek FormsPro 4300 User Manual Page 22