Printek FormsPro 4300 User Manual download pdf (Page 31)

Operation

Page 3-11

Function Possible Values Description

DTR: Power*, Online, or Busy Selects the condition to be reflected

by the DTR signal (pin 20 of the

RS-232C interface). Available

only when the RS-232C interface is

installed and Serial is selected.

XON/XOFF: Off* or On Enables or disables the

transmission of the XON and

XOFF characters from the printer

to the host to control data flow to

the printer. Not available when

Parallel, or CX/TX is selected.

ETX/ACK: Off* or On Enables or disables the ACK

response to receipt of the ETX

character. Not available when

Parallel, or CX/TX is selected.

Auto CR: Off* or On Enables or disables automatic

Carriage Returns (CR) when a Line

Feed (LF), Vertical Tab (VT), or

Form Feed (FF) is received.

Auto LF: Off* or On Enables or disables automatic Line

Feeds (LF) when a Carriage Return

(CR) is received.

Long Line: Wrap* or Trunc Sets whether characters beyond the

right margin will be wrapped to the

next line or truncated.

Left Edge: Fixed or Float* Sets whether the left edge of the

line will be printed 1/2 inch from

the detected edge of the paper or be

fixed at position “0” on the ruler.

FF at TOF: Yes* or No Sets whether Form Feeds (FF) will

be performed when received from

the host computer if the paper is

already positioned at the top of

form (TOF).

Scroll Delay: 0, 1*, 2 through 15 Sets the number of seconds to delay

before scrolling the top of form to

the tear bar when the printer is idle

and a form boundary has been

reached.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 104 105

No comments

Printek FormsPro 4300 User Manual Page 31