Printek FormsPro 4300 User Manual download pdf (Page 60)

Optional Coaxial/Twinaxial Interface

Page C-2

In the DSC/DSE type LU3 mode, both formatted and unformatted data streams are supported.

Interface diagnostics are available at the end of this appendix in the section titled

“Coaxial/Twinaxial Interface Diagnostics”.

CX/TX Interface.

Option Switches When Configured for Coaxial Operation

The dipswitches as shown above have the following meanings when the interface is

configured for coaxial operation. An asterisk (*) indicates the factory default setting.

Switch/Position Function

SW1-1 OFF* Select IBM 3287 Emulation.

SW1-1 ON Select IBM 3262 Emulation.

SW1-2 OFF* Reserved for future use.

SW1-3 OFF* Reserved for factory use.

SW1-4 OFF* Reserved for factory use.

SW1-5 OFF* Set default Maximum Print Position to 132

columns.

SW1-5 ON Set default Maximum Print Position to none.

SW1-6 OFF* Set default Maximum Print Line to none.

SW1-6 ON Set default Maximum Print Line to 66 lines.

SW1-7 SW1-8 Parallel multiplexer timeout.

OFF* OFF* Short (15 seconds)

ON OFF Medium.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 104 105

No comments

Printek FormsPro 4300 User Manual Page 60