Printek FORMSMASTER 8000SE Operator's Manual download pdf (Page 59)

PRINTER CONFIGURATION

Interface Menu

The Interface Menu may contain several submenus. These submenus are

for setting up items pertaining to the hardware interfaces such as the serial

and parallel ports as well as the optional 10/100BaseT Ethernet or the

Wireless Print.

The Setup items for each interface are described in one of the following

sections.

RS-232C Serial Interface on page 52

Parallel/LAN Interfaces on page 57

Entering the Interface Menu

To Enter the Interface Menu, enter Setup and press the MENU button until

INTERFACE MENU is displayed on the top line as shown below.

INTERFACE MENU

Serial

The SUBMENU options for the INTERFACE MENU always include the

Serial and Parallel ports. The other ports mentioned earlier will only be

displayed if they are installed in the printer. This is also true of the Imager

or ImagerPlus graphics options. To select the desired interface, press the

SUBMENU button until that interface is displayed on the bottom line. Next

press either of the ITEM buttons to begin displaying the items associated

with that interface. Each interface and the items which pertain to that

interface are listed on the following pages. Note that many items are the

same for more than one interface since the computer attached to that

interface may have different requirements for each of those items.

The factory default values are indicated with an asterisk (*) in this manual

(the asterisk does not appear on the printer’s display).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 126 127

No comments

Printek FORMSMASTER 8000SE Operator's Manual Page 59