Printek FormsPro 4300 User Manual download pdf (Page 11)

Installation and Quick Setup

Page 2-5

INSTALLING PAPER

If the printer is not currently turned on, push the ON-1 side of the power switch on the right

side of the printer. After you turn on the printer, it performs several self tests. If the printer is

a FormsPro 4503, these tests also make sure that the tractors are properly positioned after

shipment.

Paper is installed through the slot in the bottom of the printer. To open the unit so you can

install paper, pull outward on the bottom of the lower front panel of the printer as shown to

release the latch.

Opening Latch Panel.

While you pull outward on this panel, lift the front of the unit to expose the paper tractors.

The top of the unit will support itself in the up position while you load paper.

Caution: Do not open the unit in this fashion while the

printer is printing or forms are loaded. Doing so may

cause data to be printed incorrectly or paper to jam

when the cover is closed. Refer to the "Operation"

section for information about unloading forms.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 104 105

No comments

Printek FormsPro 4300 User Manual Page 11